FMEA vs RCA – Interactive Failure Analysis Simulator
FMEA vs RCA – Interactive Failure Analysis and Root Cause Analysis Simulator
In industrial plants, equipment failures can lead to production loss, unexpected shutdowns, increased maintenance costs and safety risks. Instrumentation and maintenance engineers need effective methods to identify potential failures and understand why equipment has failed.
Two important techniques used in reliability and maintenance engineering are Failure Mode and Effects Analysis (FMEA) and Root Cause Analysis (RCA).
Although both methods help improve equipment reliability, they serve different purposes.
- FMEA: Identifies what could go wrong before a failure occurs.
- RCA: Investigates why a failure occurred and identifies actions to prevent recurrence.
This interactive simulator demonstrates both techniques through a pump failure scenario. You can observe how FMEA ranks potential equipment failures using Risk Priority Number (RPN), and how RCA traces a failure back to its underlying cause.
1. What is FMEA?
Failure Mode and Effects Analysis (FMEA) is a systematic method used to identify potential failure modes in equipment, assess their risks and prioritise corrective or preventive actions.
The main objective is to identify problems before they cause equipment failure.
For example, consider a centrifugal pump. Different components can fail in different ways:
- Mechanical seal may leak.
- Bearing may seize.
- Motor may overheat.
- Coupling may slip.
FMEA evaluates each potential failure based on three factors:
Severity (S)
Severity indicates how serious the consequences of a failure could be.
A high severity score means the failure could have a major impact on equipment, production, safety or the environment.
Occurrence (O)
Occurrence indicates how frequently a particular failure is expected to happen.
A higher occurrence score means the failure is more likely to occur.
Detection (D)
Detection indicates how difficult it is to identify the failure before its consequences occur.
A higher detection score means the failure is more difficult to detect.
What is RPN?
Risk Priority Number (RPN) is calculated by multiplying the three scores.
RPN = Severity × Occurrence × Detection
For example:
- Severity = 8
- Occurrence = 6
- Detection = 6
RPN = 8 × 6 × 6 = 288
A higher RPN indicates a higher priority for review and risk-reduction action in this simplified scoring approach.
RPN is a prioritisation aid. Engineers should also consider high-severity risks independently rather than relying only on the numerical ranking.
2. FMEA Example – Centrifugal Pump
The simulator includes four potential pump failure modes.
Mechanical Seal – Leakage
- Severity: 7
- Occurrence: 5
- Detection: 4
- RPN: 140
A mechanical seal failure can cause liquid leakage, housekeeping problems and potential environmental or safety concerns.
Bearing – Seizure
- Severity: 8
- Occurrence: 6
- Detection: 6
- RPN: 288
Bearing seizure can cause severe vibration, increased temperature and pump shutdown.
Motor – Overheating
- Severity: 9
- Occurrence: 3
- Detection: 3
- RPN: 81
Motor overheating can lead to insulation damage and motor failure.
Coupling – Slippage
- Severity: 5
- Occurrence: 4
- Detection: 3
- RPN: 60
Coupling slippage can affect power transmission and pump performance.
Which Failure Should Be Prioritised?
In this simulator, bearing seizure has the highest RPN of 288.
Therefore, it receives the highest priority for review based on the calculated RPN.
The simulator highlights the failure-mode rows as the risk assessment progresses. You can observe how the scores and RPN values appear during the animation.
3. What is Root Cause Analysis (RCA)?
Root Cause Analysis is a structured problem-solving method used after a failure or undesirable event has occurred.
The objective is not simply to repair the failed component. It is to understand why the failure happened and identify actions that prevent it from happening again.
Consider this example:
A pump has stopped because its bearing has seized.
Replacing the bearing may restore the pump to service, but it does not necessarily prevent another bearing failure.
The maintenance team must investigate further:
- Why did the bearing seize?
- Was there sufficient lubrication?
- Was the oil level maintained?
- Was the lubrication task included in the preventive maintenance plan?
- Why was the required maintenance activity missed?
This investigation helps identify the underlying cause rather than stopping at the immediate equipment failure.
4. RCA Example – Pump Bearing Failure
The simulator demonstrates a bearing failure using a step-by-step cause-and-effect sequence.
Follow the sequence:
- Pump stopped – The equipment is no longer operating.
- Bearing seized – The immediate equipment failure is identified.
- No oil film – The bearing did not have the required lubrication film.
- Oil not topped up – The required lubrication level was not maintained.
- Not in the PM plan – The oil-check activity was not included in the preventive maintenance plan.
- Root cause: No PM reminder – The investigation identifies the missing maintenance reminder as the underlying cause in this training scenario.
- Corrective action – Add an oil check to the preventive maintenance plan.
This example shows why replacing a failed component alone may not be sufficient.
The corrective action should address the identified cause so that the same problem is less likely to happen again.
Important: The simulator uses a predefined training scenario. In a real plant, engineers must verify each cause using maintenance history, inspection findings, operating records and other available evidence.
5. Understanding the FMEA vs RCA Simulator
The simulator displays FMEA and RCA together, allowing you to understand how they complement each other.
FMEA – Before Failure
The FMEA section displays four pump components:
- Seal
- Bearing
- Motor
- Coupling
Each component has a potential failure mode and three risk-scoring parameters: Severity, Occurrence and Detection.
The simulator calculates the RPN for each failure mode and highlights the highest-ranked risk during the demonstration.
This represents the forward-looking approach of FMEA.
RCA – After Failure
The RCA section displays the pump failure investigation as a sequence of connected steps.
As you move through the timeline, the simulator reveals the immediate failure, contributing conditions, underlying cause and corrective action.
This represents the backward-looking approach of RCA.
Pump Failure Animation
The central pump illustration shows the equipment condition changing as the simulation progresses.
You can observe:
- The initial healthy condition.
- The pump moving towards a failure condition.
- Bearing failure.
- The failed equipment indication.
- The corrective action and recovery stage.
The animation connects the risk assessment with the failure investigation.
6. How to Use the Simulator
Play Button
Select PLAY to start the complete demonstration.
The simulator gradually progresses through the FMEA assessment, pump failure, RCA investigation and corrective action.
Select PAUSE to stop the animation temporarily.
Timeline Slider
Use the timeline slider to move through the simulation manually.
This is useful when you want to study a particular stage.
You can observe:
- FMEA risk assessment before failure.
- Individual component failure risks.
- Pump failure.
- Bearing seizure.
- RCA investigation.
- Identification of the underlying cause.
- Corrective action and updated FMEA.
You can also click on the timeline to move to the corresponding stage.
FMEA Failure Rows
Select a failure-mode row to highlight the corresponding pump component in the animation.
This helps connect the FMEA assessment with the physical equipment component.
RCA Investigation Steps
Select the RCA steps to highlight the bearing-related investigation in the pump illustration.
Follow the cause sequence to understand how the investigation moves from the immediate failure towards the underlying cause.
Full Screen
Select FULLSCREEN to expand the simulator.
This is useful for classroom demonstrations, technical discussions and reliability training sessions.
7. FMEA vs RCA – When Should You Use Each?
FMEA and RCA are complementary techniques, but they are applied at different stages of reliability improvement.
Use FMEA when:
- Evaluating new equipment or a new process.
- Reviewing critical equipment failure modes.
- Preparing preventive maintenance strategies.
- Identifying high-risk components.
- Reviewing design or operational changes.
- Prioritising reliability improvement activities.
Use RCA when:
- Equipment has experienced a major failure.
- The same problem occurs repeatedly.
- Unexpected equipment trips occur.
- Production losses need investigation.
- Maintenance activities do not prevent recurring failures.
- A permanent corrective action is required.
For example, FMEA may identify bearing seizure as a high-priority potential failure. If the bearing later fails, RCA can investigate the actual reason for that failure.
The findings from RCA can then be used to update the FMEA.
8. Practical Application in Maintenance and Reliability Engineering
These methods are particularly useful for critical equipment in power plants, oil and gas facilities, refineries and process industries.
Consider a thermal power plant with several critical pumps.
A reliability engineer can use FMEA to assess potential failure modes such as:
- Bearing failure.
- Mechanical seal leakage.
- Motor winding overheating.
- Coupling misalignment.
- Lubrication failure.
The assessment helps identify which failure modes require more attention.
If a critical pump experiences repeated bearing failures, RCA can be performed to investigate the actual causes.
Depending on the findings, improvement actions may include:
- Revising the preventive maintenance frequency.
- Introducing regular lubrication checks.
- Improving oil storage and handling practices.
- Reviewing bearing installation procedures.
- Introducing vibration or temperature monitoring.
- Improving maintenance work instructions.
The effectiveness of the corrective action should be checked by monitoring equipment performance and subsequent failure history.
9. Practical Exercise for Instrumentation and Maintenance Engineers
Try the following exercises using the simulator.
Exercise 1 – Identify the Highest-Risk Failure
- Start the simulator.
- Observe the four pump failure modes.
- Compare their Severity, Occurrence and Detection scores.
- Calculate the RPN for each failure.
- Identify which failure has the highest RPN.
Exercise 2 – Understand the RCA Sequence
- Move the timeline towards the pump failure stage.
- Observe the bearing seizure.
- Follow the investigation steps.
- Identify why the bearing lubrication was inadequate.
- Find the underlying cause shown in the simulator.
Exercise 3 – Review the Corrective Action
- Continue the simulation towards the final stage.
- Observe the proposed PM plan improvement.
- Check the updated occurrence score.
- Compare the original and revised RPN.
In the simulator, the bearing occurrence score changes from 6 to 2 after the corrective action.
The RPN changes from:
Original RPN = 8 × 6 × 6 = 288
Updated RPN = 8 × 2 × 6 = 96
This demonstrates how a corrective action intended to reduce the likelihood of failure can improve the risk ranking.
The updated score is an illustrative training assumption. In a real plant, the revised occurrence rating should be supported by evidence that the action has been implemented and is effective.
10. Important Points to Remember
- FMEA is a proactive method used before equipment failure.
- RCA is a reactive investigation performed after a failure or undesirable event.
- FMEA identifies potential failure modes and evaluates their risks.
- RCA investigates the causes of an actual problem.
- RPN is calculated using Severity × Occurrence × Detection.
- A high RPN helps identify failure modes requiring attention.
- Corrective actions should address the identified cause.
- RCA findings should be considered when updating the FMEA.
- Always verify the effectiveness of corrective actions using actual equipment performance and failure history.
Conclusion
FMEA and RCA are two important tools in reliability engineering.
FMEA helps engineers identify potential equipment failures before they occur, while RCA helps determine why an actual failure happened.
Both methods work together to improve equipment reliability and reduce repeat failures.
Use this interactive simulator to explore the pump failure scenario, calculate RPN values, follow the bearing failure investigation and understand how a preventive maintenance improvement can reduce the assessed risk.
Training note: This simulator uses predefined pump failure modes, scoring values and a simplified RCA scenario. The timeline, RPN changes and corrective action are intended for learning. Actual FMEA scoring and RCA conclusions must be based on equipment-specific evidence, engineering judgement and site procedures.
