FMEA full form
FMEA full form is Failure Modes and Effects Analysis. This is one of the abbreviations used by control and instrumentation specialists to save time during communication or writing . The abbreviations make it easier to identify the system, process, and equipment in a shorter manner.
FMEA
Failure Modes and Effects Analysis
Similar abbreviation like FMEA full form
| PLC: Programmable Logic Controller |
| DCS: Distributed Control System |
| SCADA: Supervisory Control and Data Acquisition |
| HMI: Human-Machine Interface |
| PID: Proportional-Integral-Derivative |
| IO: Input/Output |
| ATS – Automatic Transfer Switch |
| RTD: Resistance Temperature Detector |
| PWM: Pulse Width Modulation |
| ADC: Analog-to-Digital Converter |
| DAC: Digital-to-Analog Converter |
| HART: Highway Addressable Remote Transducer |
| FBD: Function Block Diagram |
| IEC: International Electrotechnical Commission |
| P&ID: Piping and Instrumentation Diagram |
| MCC: Motor Control Center |
| VFD: Variable Frequency Drive |
| RTU: Remote Terminal Unit |
| FMEA: Failure Modes and Effects Analysis |
| ESD: Emergency Shutdown |
| LDR: Light Dependent Resistor |
| NTC: Negative Temperature Coefficient |
| ESD – Emergency Shutdown |
| AI: Analog Input |
| AO: Analog Output |
| DI: Digital Input |
| I&C – Instrumentation and Control |
| DO: Digital Output |
| PDA: Process Data Acquisition |
| FCS: Flow Control System |
| BPCS: Basic Process Control System |
| FDT: Field Device Tool |
| SIL: Safety Integrity Level |
| MCR: Master Control Room |
| CCS: Control and Communication System |
| IPS: Instrumented Protective System |
| LVDT – Linear Variable Differential Transformer |
| LCI: Load Commutated Inverter |
| VLSI: Very Large Scale Integration |
| OSI: Open Systems Interconnection |
| UPS: Uninterruptible Power Supply |
| GSM: Global System for Mobile Communications |
| RF: Radio Frequency |
| MFM: Frequency Modulation |
| AM: Amplitude Modulation |
| LVDT: Linear Variable Differential Transformer |
| MCM: Multivariable Control Module |
| SIS: Safety Instrumented System |
| HPS: High-Performance System |
| MFC: Mass Flow Controller |
| RIO: Remote Input/Output |
| SSC: System Safety Controller |
| PAC: Programmable Automation Controller |
| PM – Preventive Maintenance |
| PPE – Personal Protective Equipment |
| P&ID – Piping and Instrumentation Diagram |
| RTU – Remote Terminal Unit |
| EMI: Electromagnetic Interference |
| FDI: Field Device Integration |
| OEE: Overall Equipment Effectiveness |
| TCP/IP – Transmission Control Protocol/Internet Protocol |
| SIS – Safety Instrumented System |
| MIMIC – Man-Machine Interface and Control |
| VFD – Variable Frequency Drive |
| NTC – Negative Temperature Coefficient |
| PAC – Programmable Automation Controller |
| PCB – Printed Circuit Board |
| P&ID – Piping and Instrumentation Diagram |
| PID – Proportional-Integral-Derivative |
